General Information
- Section Joint: Tongue and Groove joint between sections with thermal break
- Thickness: 2″
- R Value = 9 (Calculated door section R Value in accordance with DASMA-163)
- Finish: Baked on polyester enamel
- Colors selection: White
- Bottom weather seal: U-shape loop type vinyl with aluminum retainer
Hardware
15″ or 20″ radius torsion hardware; track is 2″ bracket mounted. Quiet long life nylon rollers, non-corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.
STANDARD WIDTHS: | 8′-0″ | 9′-0″ | 10′-0″ | 16′-0″ | 18′-0″ | 20′-0″ |
PANELS WIDE: | 2 | 2 | 2 | 4 | 4 | 4 |
ODD WIDTHS: | 7′-6″ to 10′-11″ = 2 panels 11′-0″ to 14′-11″ = 3 panels 15’0″ to 20’0″ = 4 panels |
|||||
STANDARD HEIGHTS: | 7′-0″ | 8′-0″ | 9′-0″ | 10′-0″ | 12′-0″ | 14′-0″ |
Sections available in 27″, 28″, 31″ and 32″ in height |
Recommended Options
Extended Life
- 25,000 Cycle Torsion Springs
- Heavy Gauge Hinges
- Heavy Duty Cables
Other Options
- Single Pane and Insulated Glass Options
- Low Clearance, High Lift, or Vertical Lift Hardware
- White Nylon Ball Bearing Rollers
- Angle Mounted Track
- Double End Hinges and Long Stem Rollers
- 25,000, 50,000 and 100,000 Cycle Torsion Springs
- Powder Coated Hardware
Glass
* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.