General Information
- Door Face: Wood grain texture, pencil grooves 4″ on center
- Section Heights: 21″ and 24″
- Section Joint: Tongue and Groove joint between sections with thermal break and flexible vinyl seal
- 20 gauge steel concealed backer plates, pre-painted 20 GA galvanized end caps
- Finish: 4-Coat Process, Galvanized, Phosphate Treated, Baked-on Epoxy Base Coat, and Polyester Top Coat
- Colors selection: White
- Bottom weather seal: U-shape loop type PVC with adjustable aluminum retainer
Standard Hardware
15″ radius torsion hardware; track is 2″ hemmed and bracket mounted. 3″ track supplied when required by weight. Heavy duty steel rollers, non corrosive door fixtures and 14 gauge graduated hinges are standard. Double end hinges and long stem rollers are included on doors as required by width and weight. U-shaped galvanized struts are supplied as required by width and weight to keep the door rigid. All doors are standard with interior slide bolt lock.
| STANDARD WIDTHS: | 8′-2″ | 9′-2″ | 10′-2″ | 12′-2″ | 14′-2″ | 16′-2″ | 18′-2″ | 20′-2″ | 22′-2″ | 24′-2″ |
| Bays Horizontally | 2 | 2 | 3 | 3 | 4 | 4 | 5 | 5 | 6 | 6 |
| STANDARD HEIGHTS: | 8′-1″ | 9′-1″ | 10′-1″ | 12′-1″ | 14′-1″ | 16′-1″ |
| Sections Vertically | 4 | 5 | 5 | 6 | 7 | 8 |
Recommended Options
25,000, 50,000 or 100,000 Cycle Torsion Springs
Insulated Glass
Other Options
- 24 gauge steel face
- Single Pane Glass
- Lift Options
- Low Clearance
- High Lift
- Vertical Lift
- Angle Mounted Track
- 3” Track/Rollers
- Double End Hinges and Long Stem Rollers (when not standard)
- Chain Hoist, Reduced Drive
- Powder Coated Hardware
Glass
* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.
1/4″ Mirrorpane
1/4″ Clear
1/4″ Plexiglass
1/4″ Polycarbonate
7/32″ White Diffused Laminate
1/8″ Bronze
1/8″ Clear
1/8″ Satin Etch
1/2″ Insulated Clear
1/8″ Polycarbonate
1/8″ Acrylic
1/8″ P516 Obscure
1/8″ Mistlite
1/8″ Greylite #31
1/8″ Gray
1/8″ Gluechip
