General Information
- Frame: 2″ thick extruded aluminum 6063-T5
- Finish: Standard, Class II clear Anodized
- Section Joint: Tongue and Groove Joints with compressible foam gasket between sections
- Top & Bottom Rail widths: 5-7/8″ (5-1/2″ on flat), Meeting Rail width combined: 4-3/16″ (3-1/2″ on flat)
- End Stile width: 5-7/8″ (5-1/2″ on flat), Center Stile width: 3-1/4″ (2-1/2″ on flat)
- Bottom weather seal: U-shape loop type vinyl
Standard Hardware
15″ or 12″ radius torsion hardware; track is 2″ bracket mounted. 3″ track supplied when required by weight. Quiet long life white nylon rollers, non corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door and as required by weight to keep the door rigid.
| STANDARD WIDTHS: | 8′-0″ | 9′-0″ | 10′-0″ | 12′-0″ | 16′-0″ | 18′-0″ |
| Panels Horizontally |
2
|
2
|
3
|
3
|
4
|
5
|
| STANDARD HEIGHTS: | 7′-0″ | 8′-0″ | 9′-0″ | 10′-0″ | 12′-0″ |
| Panels Vertically |
4
|
4
|
5
|
5
|
6
|
Recommended Options
Extended Life
- 25,000 Cycle Torsion Springs
- Heavy Gauge Hinges
- Heavy Duty Cables
Powder Coated Hardware
Other Options
- 24 gauge steel face
- Single Pane Glass
- Lift Options
- Low Clearance
- High Lift
- Vertical Lift
- Angle Mounted Track
- 3” Track/Rollers
- Double End Hinges and Long Stem Rollers (when not standard)
- Chain Hoist, Reduced Drive
- Powder Coated Hardware
Glass
* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.
5/32″ Solar Cool Bronze
1/4″ Clear
1/4″ Mirrorpane
1/4″ Plexiglass
1/4″ Polycarbonate
7/32″ White Diffused Laminate
1/8″ Bronze
1/8″ Satin Etch
1/2″ Insulated Clear
1/8″ Clear
1/8″ Polycarbonate
1/8″ Acrylic
1/8″ P516 Obscure
1/8″ Mistlite
1/8″ Greylite #31
1/8″ Gray
1/8″ Gluechip
Panels
* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.
0.040″ Thick, Mil Finish Stucco Embossed Aluminum
0.125″ Thick, 0.25″ Holes, 0.375″ Stagger, 40% OA Perforated Mil Finish Aluminum
0.0625″ Thick, 0.5″ Dia. Holes, 0.6875″ Stagger, 48% OA Perforated Mil Finish Aluminum
0.0625″ Thick, 0.0625″ Dia. Holes, 0.09375″ Stagger, 41% OA Perforated Mil Finish Aluminum
0.0625″ Thick, 1″x.5″ Diamond, 0.25″ Stagger 63% OA Expanded Mil Finish Aluminum
1″ Thick, Polystyrene Insulated White Aluminum
0.25″ Thick, White Corrugated Aluminum
Available Colors
* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.
Clear Anodized
Black Anodized
Dark Bronze Anodized
Dark Walnut
Mahogany
Dark Fir
Light Fir
Dark Cherry
Light Cherry
Dark Ash
Light Ash
Design Gallery
MC34-D
MC35-D
MC36-D
MC38-D
MC42-D
MC44-D
MC45-D
MC46-D
MC48-D
MC49-D
MC52-D
MC54-D
MC55-D
MC56-D
MC58-D
MC59-D
MC32-S
MC34-S
MC33-S
MC36-S
MC41-S
MC42-S
MC43-S
MC44-S
MC46-S
MC51-S
MC52-S
MC53-S
MC54-S
MC56-S
Before
After
Before & After
